Ironvale Forge · Kelham Island, Sheffield

Iron, shapedby hand.

Gates, railings and door hardware, forged one piece at a time by three smiths, and fitted by the same hands that made them.

01

Bring it to heat.

Mild steel bar goes into a coke fire at 1,250 °C. We read the temperature by colour, the way smiths always have: cherry, then orange, then straw.

1,250 °CFire
4 minTo forging heat
02

Draw it out.

Hammer blows on the anvil taper the end, about forty to a heat. When the colour drops below orange the bar goes back in the fire, never forced cold.

2 lbCross-pein
~40Blows a heat
03

Turn the scroll.

The tapered end is rolled over the horn, then closed on a scroll jig. Every scroll on a gate is matched by eye to its pair.

850 °CCherry red
±1 mmPair match
04

Finish and fit.

Dressed, wire-brushed and finished in beeswax and linseed, or hot-dip galvanised and painted for the street. Then we fit it ourselves.

60 yrGalvanised life
FittedBy the maker
On the anvil · 19 mm round barHeat 1 of 6
20°C
BlackCherryOrangeStrawWhite
Black · cold
Heat
Draw
Scroll
Finish
Recent work

Made for one doorway, one street, one house.

Forged iron gate panel with leaves and a rose
Rose gate panelEcclesall Road · 2025
14 forged leaves
Polished iron door knocker on a timber door
Ring knockerDoor hardware
from £180
Iron ball finial on a gate post
Ball finialGate posts
Grade II restoration
Lion-head knocker on a riveted bronze door
Lion-head doorRestoration · Bath
Re-cast and re-hung
What we make

Priced plainly, made slowly.

01Gates

Garden, side and drive gates, hung on forged hinges and collars. Automation available.

From£2,800
Lead time8–10 weeks
02Railings

Street railings and balustrades, matched to period patterns or drawn new.

From£420 / m
Lead time6–8 weeks
03Door hardware

Knockers, pulls, thumb latches and strap hinges, waxed or galvanised.

From£180
Lead time3 weeks
04Restoration

Listed ironwork surveyed, dismantled, repaired by fire-welding and re-fitted.

FromSurvey £240
Lead timeOn survey
0Years at the fire
0Commissions fitted
0Smiths, no subcontractors
0Steel recycled
Commission

Tell us about the opening.

Send a photo and rough measurements. We'll reply within two working days with a sketch, a price and a slot on the anvil.

Name—
Postcode—
GateRailingsDoor hardwareRestorationSomething else
Opening widthapprox. 1.2 m
FinishGalvanised + painted ▾
PhotosAdd photos +
Send to the forge →